Watersports
How to Wash and Dry a Wetsuit Without Damaging It
20 October 2026 · 3 min read
Keep your wetsuit fresh and flexible with simple rinsing, washing, drying and storage habits that protect its neoprene, seams and zip.
1. Start with the care label and a gentle rinse
A wetsuit can look clean after a session while still holding salt, sand and sweat. A simple cleaning routine helps prevent lingering smells and keeps grit away from seams and zips. Whether yours is brand new or second-hand, check the maker’s care instructions before choosing a cleaner or washing method.
After each outing, rinse the suit inside and out with cool or lukewarm fresh water. Pay attention to the neck, cuffs, underarms and knee panels, where residue can collect. Gently flush sand from the zip rather than dragging the slider through it. Avoid hot water, which can damage materials and bonded areas.
If you cannot rinse immediately, keep the suit out of direct sun and clean it when you get home. Do not leave it bundled in a warm car boot or sealed inside a wet kit bag.
2. Hand-wash when rinsing is not enough
For a more thorough clean, use a clean bath or tub with enough water to move the wetsuit around freely. Add a wetsuit cleaner that is suitable for the material, following its dilution and soaking instructions. Gently work the water through the suit without scrubbing or pulling at the panels.
Unless the manufacturer specifically permits them, avoid washing machines, ordinary laundry detergents, fabric conditioners, bleach and household disinfectants. Strong products and rough washing can affect the neoprene, lining or adhesive. Never mix cleaning products to tackle a stubborn smell.
Rinse thoroughly after washing, following the cleaner’s instructions. If an odour remains, check that the suit is drying completely between uses rather than repeatedly increasing the amount of cleaner.
3. Dry it without stretching the shoulders
Let excess water drain, then gently press the material without twisting or wringing it. Start with the wetsuit inside out so the surface against your skin dries first. A shaded, well-ventilated spot is ideal; keep it away from radiators, tumble dryers and other direct heat sources.
Drape the suit at the waist over a broad, smooth rail or use a wetsuit hanger designed to support it while wet. A thin coat hanger can concentrate the weight of a soaked suit on its shoulders. Make sure the arms and legs are not tightly folded together.
Once the inside is dry, turn it the right way out and finish drying the exterior. Check the cuffs and thicker panels before putting it away: the surface may feel dry while tucked-away areas are still damp.
4. Check seams and zips before storing
Cleaning is a useful opportunity to inspect high-stress areas. Look around the crotch, underarms, knees and zip ends for small tears, lifting seam tape or separating joins. Avoid stretching a damaged section to investigate it, as this can make a small problem worse.
Store the fully dry suit loosely folded or supported on a suitable broad hanger, following the maker’s advice. Keep it somewhere cool and dry, away from sunlight and heavy items that could squash permanent creases into it. Use only manufacturer-approved zip care products if lubrication is needed.
5. Prepare a clean wetsuit for its next owner
If you are selling, wash and dry the wetsuit before photographing it. Show the size label, front and back, zip, cuffs and any repairs or worn panels. Include its stated thickness and explain how it fits you, without suggesting that one person’s fit guarantees another’s.
Describe persistent smells, seam damage or stiff areas honestly, and pack only when completely dry. Selling on HobbyTrade is free, with no listing fees and no seller commission. Buy now payments are covered by Buyer Protection, helping buyers shop for their next watersports session with greater confidence.