← All articles

Fishing

How to Clean and Dry a Fishing Landing Net

18 October 2026 · 3 min read

Remove slime, tackle lingering smells and dry your landing net properly, with practical tips for mesh, joints and storage between fishing trips.

1. Start before the net goes in the car

A landing net can look clean while still holding fish slime, silt and fragments of weed around its seams. Packing it away wet encourages unpleasant smells and can leave moisture trapped against metal fittings. A simple cleaning routine also helps reduce the risk of carrying aquatic plants and organisms between waters.

Before leaving your fishing spot, inspect the mesh, frame and handle for mud, weed and anything caught in the folds. Follow the venue’s biosecurity instructions and use any designated cleaning facilities as directed. A net bag or waterproof tub can contain drips during transport, but treat it as temporary containment rather than somewhere to leave a damp net until your next trip.

2. Check the mesh and dismantle carefully

At home, open the net fully and look for trapped hooks before putting your hands into the mesh. Remove any carefully with suitable tools. Check the seams, mesh attachment points and frame for tears, rough edges or exposed metal that could injure a fish. Cleaning is a good opportunity to spot damage that was easy to miss on the bank.

If the design allows it, separate the handle and net head according to the manufacturer’s instructions. Do not force a seized thread or pull elastic through a joint just to dismantle it. On folding nets, open the hinges and locking mechanism so you can reach trapped grit. Keep any removable fittings together in a tray.

3. Rinse away slime without harsh scrubbing

Rinse the net with fresh water at low pressure, working from the frame towards the deepest part of the mesh. Gently move the folds apart so water reaches the seams. Use a soft cloth or soft brush on stubborn deposits, taking particular care with rubberised coatings. Avoid pressure washers, abrasive pads and very hot water, which may damage mesh, coatings or adhesives.

For lingering grime or smells, consult the maker’s care advice before using a cleaning product. Do not improvise with bleach, solvents or strongly scented household cleaners. If a disinfectant is recommended by the venue or relevant biosecurity guidance, check that it is suitable for your net and follow its dilution, contact-time, rinsing and disposal instructions. Keep cleaning water and products away from ponds, streams and surface-water drains.

4. Dry every fold before storing

Shake off excess water gently, then hang or support the net in a well-ventilated place with the mesh spread open. Avoid leaving the wet mesh bunched inside its frame. Let hollow handles drain where their design permits, and wipe threads, hinges and frame joints with a clean cloth. Keep the net away from radiators and other intense heat sources.

Check the deepest folds and stitched edges by touch before packing it away: the outer mesh may feel dry while these areas remain damp. Clean and dry the transport bag too. Store everything somewhere dry and shaded, without heavy tackle pressing on the frame. Drying supports biosecurity, but does not replace any additional measures required by a fishery.

5. Make the routine useful when selling

If you are passing your net on, clean and dry it before taking photographs. Show the mesh spread out, any repairs, the frame joints and the handle connection. Include its dimensions and packed length, and describe any sticking locks or damaged coatings honestly rather than masking smells with fragrance.

A clean, clearly described net is easier for another angler to assess. Selling on HobbyTrade is free, with no listing fees and no seller commission, and Buy now payments are covered by Buyer Protection.

Ready to buy or sell? Selling is free.

Start selling – FREEBrowse marketplace