← All articles

Cycling

Buying Used Cycling Shoes: Cleats, Fit and Sole Checks

18 October 2026 · 3 min read

Find second-hand cycling shoes that fit your feet and pedals, with practical checks for cleat mounts, closures, sole damage and hidden wear.

Start with your pedals and riding style

Used cycling shoes can be a worthwhile upgrade, but a bargain pair is only useful if it suits your feet and your pedals. Before browsing, decide whether you need shoes for road riding, commuting, mountain biking or indoor cycling. Walking comfort matters much more for café stops and station platforms than it does for riding without stopping.

Check the cleat mounting pattern rather than relying on the listing’s description. Many road shoes use three-bolt mounts, while many mountain bike and touring shoes use two-bolt mounts with recessed cleats. Some systems differ, so confirm compatibility using the shoe and pedal manufacturers’ information. Flat-pedal shoes need no cleats; instead, look for a supportive sole with rubber designed to grip pedal pins.

Check fit beyond the size label

Cycling shoe sizing varies between brands and models. Ask for the exact model, labelled size and any width marking. An insole measurement can help you compare with shoes you already own, but it cannot tell you everything about toe-box shape or heel hold. Avoid assuming that your usual trainer size will fit.

If you can try them on, wear your normal cycling socks and fasten both shoes as you would for a ride. Your toes should have room without your feet sliding around, and your heels should stay reasonably secure. Watch for pressure across the widest part of your foot, numbness or a closure that must be overtightened to hold you in place.

Check whether the original insoles are included. Replacement insoles can alter internal space, while heavily compressed ones may need replacing. Do not buy an uncomfortable pair expecting a stiff cycling shoe to stretch enough to solve a poor fit.

Inspect soles and cleat mounting points

Ask for clear photographs of both soles, including the areas around the cleats. Light scuffing can be ordinary wear, but cracks, separation between the upper and sole, or damaged mounting areas are reasons to walk away. Carbon soles deserve particular care: photographs alone cannot reliably rule out hidden damage, especially after a significant impact.

For clip-in shoes, check that the cleat bolts are not rounded, badly corroded or seized. With the seller’s agreement, removing the cleats can reveal damage they conceal. Mounting threads should accept the correct bolts without binding; never force a bolt to test them. Some two-bolt shoes have mounting plates that move for adjustment, so movement alone is not necessarily a fault.

Treat included cleats as a separate wear item, not a guaranteed bonus. Rounded engagement edges, cracks or uneven wear may mean replacement is needed. On flat-pedal shoes, look for deep pin gouges, worn-smooth patches and rubber peeling away from the sole.

Test closures and inspect the lining

Open and close every dial, buckle or strap several times. Dials should tighten and release as intended, cables should not be frayed, and ratchet buckles should hold securely. Hook-and-loop straps need enough grip to stay fastened under tension. Check whether replacement parts are available for the exact model before accepting a faulty closure.

Look inside the heel cups for worn-through lining, exposed stiff edges and collapsed padding. Inspect stitching, mesh panels and the tongue for tears or uncomfortable folds. Persistent dampness, visible mould or a strong musty smell suggest poor storage. Removable insoles are helpful for cleaning, but fresh insoles will not repair damaged lining or structural wear.

Agree what is included and budget for setup

Before buying, confirm whether cleats, bolts and insoles are included, and allow for any replacements when judging value. Ask about repairs, crashes and closure problems. Once the shoes arrive, clean them according to the maker’s instructions and dry them away from direct heat. Fit compatible cleats using the specified hardware and tightening guidance, then check engagement and release somewhere controlled before riding in traffic.

If you are selling a pair, photograph the size labels, soles, mounting points and any wear, and describe faults plainly. Selling on HobbyTrade is free, with no listing fees and no seller commission. Buy now payments are covered by Buyer Protection, helping you buy your next pair with greater confidence.

Ready to buy or sell? Selling is free.

Start selling – FREEBrowse marketplace