Archery
Buying a Used Recurve Bow Sight: Threads, Travel and Fit
21 October 2026 · 3 min read
Check mounting compatibility, adjustment travel and loose parts before buying a second-hand recurve bow sight for target archery.
Start with compatibility, not the brand
A second-hand recurve sight can be a useful upgrade from basic club equipment, but a bargain soon becomes frustrating if it will not fit your bow or hold its settings. Focus on the mounting arrangement, smooth adjustment and availability of spare parts rather than appearance alone.
Ask for the exact make and model, whether it is intended for a right- or left-handed setup, and clear photographs of the mounting block. Some sights can be reversed; others need different components. Check the manufacturer’s information against your riser rather than assuming every recurve sight fits every bow.
Confirm what is included: the riser mounting block, fixing screws, extension bar, vertical track, sight carrier and aperture. A missing mounting block can make an otherwise complete sight unusable, particularly if replacements are difficult to source.
Inspect the extension bar and mounting hardware
Request close-up photographs of the extension bar, especially around clamping points and adjustment holes. Look for bends, cracks, crushed areas or signs that someone has overtightened a clamp. On carbon components, exposed fibres or splitting are reasons to stop and seek specialist advice, not cosmetic faults to ignore.
Check the mounting block for damaged screw heads, distorted holes and worn threads. The correct screws should engage cleanly by hand before being tightened as the manufacturer recommends. Do not force a reluctant screw or use a longer substitute without checking its suitability for the riser.
Light surface marks are normal on used equipment. More concerning are rounded clamp knobs, repairs around load-bearing parts or an extension bar that still rocks when properly secured. Ask the seller to demonstrate the clamping mechanism in a short video.
Test elevation, windage and locking controls
The sight carrier should move through its usable elevation range without binding or sudden tight spots. Ask the seller to demonstrate both coarse movement and fine adjustment, if fitted. Windage adjustment should also operate smoothly, with the sight pin moving predictably rather than turning loosely without changing position.
A little play while a lock is released may be part of the design; movement after everything is correctly locked deserves investigation. Watch for a carrier that twists, an aperture that wobbles or adjustment knobs that feel gritty. Worn threads and damaged lead screws can be awkward to repair.
Check that scales remain readable and locking controls are accessible when the sight is fitted. If testing in person, start with an unstrung bow. Any shooting trial should take place on a suitable archery range with permission and appropriate supervision; never dry-fire a bow to test for rattles.
Check the aperture and your adjustment needs
Inspect the aperture or sight pin for bends, cracks and damaged threads. If you plan to swap it, verify the thread specification and replacement availability first. Similar-looking fittings are not necessarily interchangeable, and forcing the wrong thread can damage the carrier.
Consider the distances you shoot and whether the sight offers suitable adjustment for your setup. Your draw weight, arrows and anchor position all affect sight marks, so another archer’s settings will not transfer directly. A coach can help assess likely adjustment and clearance needs, especially if you are buying your first sight.
Agree the condition and plan for delivery
Compare complete examples of the same model and allow for any missing hardware before making an offer. Ask the seller to record known faults and pack the sight securely, with delicate protruding parts protected and loose screws bagged separately.
If you are replacing your current sight, the same checks make a helpful selling checklist. Photograph the fittings, explain any wear and list every included part. Selling on HobbyTrade is free, with no listing fees and no seller commission, and Buy now payments are covered by Buyer Protection.