← All articles

Archery

Buying a Used Recurve Bow Sight: Fit and Adjustment Checks

12 October 2026 · 3 min read

Check mounting fit, adjustment threads and missing parts before buying a second-hand recurve sight for target archery.

Start with your bow and shooting needs

A second-hand recurve sight can be a useful upgrade from a basic club model, but only if it fits your bow and holds its settings reliably. Smooth adjustment and readily available spare parts matter more than a smart finish. Before browsing, note your riser model, whether you shoot right- or left-handed, and what frustrates you about your current sight.

Check the manufacturer’s information for mounting compatibility rather than assuming every sight fits every riser. Ask whether the sight is intended for your shooting hand and whether it can be converted if necessary. A listing described simply as an ‘archery sight’ might be for a compound bow or have fittings unsuitable for your setup.

For a beginner, a straightforward sight with secure locks may be more useful than a complicated model with unfamiliar controls. If you are unsure what adjustment range you need, ask your club coach before buying.

Confirm that all the fittings are included

Ask for a photograph of everything laid out separately. You want to identify the riser mounting block, mounting screws, extension bar, vertical sight rail, adjustment carriage and sight pin or aperture. Some sellers leave the mounting block attached to their old bow, making an apparently complete sight unusable until you find a replacement.

Check screw specifications against the sight and riser manufacturers’ guidance. A screw that appears close enough can damage a threaded mounting hole, so never force one into place. If the seller has substituted hardware, ask exactly what was changed.

Find out whether replacement blocks, screws and apertures are still available. A low asking price is less attractive if one missing specialist fitting is difficult to source. An original case and instructions are helpful extras, but neither compensates for incomplete mounting hardware.

Inspect the bar, rail and adjustment threads

Request close-up photographs of the mounting block, both sides of the extension bar and the full length of the vertical rail. Look for bends, cracks, distorted holes and damaged screw heads. Light surface marks are usually less concerning than damage around clamping points or evidence of a heavy impact.

If inspecting in person, move the elevation carriage through its usable range following the manufacturer’s instructions. It should move without persistent sticking or sudden loose spots. Test the windage adjustment too, checking that it moves the aperture predictably rather than turning without effect.

Small amounts of play may be adjustable on some designs, but do not assume every rattle needs only a quick tightening. Ask about previous repairs and avoid cracked parts, stripped threads or makeshift fixes. Never overtighten a clamp to disguise movement.

Check that settings stay put

With the sight correctly assembled and its locks secured, gently check for unwanted movement at the mounting block, extension and carriage. There should not be obvious slipping. Inspect the aperture and its threaded stem for bending, and check that any retaining nuts are present.

Ask the seller whether the sight has loosened during shooting or needed repeated adjustment. A short video showing the controls operating is useful for a remote purchase, although it cannot prove that settings remain stable through a session.

If a shooting test is possible, arrange it at an appropriate archery range with permission and experienced help. Never dry-fire a bow to test sight vibration. Record your own sight marks after fitting: the seller’s settings will not necessarily suit your bow, arrows or shooting technique.

Agree the details before you buy or sell

Compare the total cost, including missing fittings and delivery, with other complete examples of the same model. Keep a record of the stated condition and included parts. For posting, ask the seller to protect the adjustment controls and aperture, secure loose hardware separately and cushion everything in a sturdy box.

Selling your previous sight? Include its exact model, handedness, fittings and clear photographs of any wear. Selling on HobbyTrade is free, with no listing fees and no seller commission. Buy now payments are covered by Buyer Protection, giving buyers another reason to keep payment within the platform.

Ready to buy or sell? Selling is free.

Start selling – FREEBrowse marketplace