Equestrian
Buying a Used Mounting Block: Height, Grip and Stability
21 November 2026 · 3 min read
Check a second-hand mounting block for safe footing, sound construction and a useful height before bringing it home to your yard.
Choose a block that suits your mounting area
A second-hand mounting block can be a useful yard upgrade, but it needs to offer more than a convenient step up. The right block gives you room to stand comfortably, stays steady under your weight and works with the space where your horse is accustomed to standing. Start with your intended location rather than choosing purely by appearance.
Measure the available space and think about the approach for both horse and handler. You need room to position the horse alongside without trapping anyone against a fence or wall. Check whether the block will sit on firm, level ground, and avoid assuming that a heavy model will be stable on an uneven surface.
Check height, tread depth and standing space
Ask the seller for the overall height, base dimensions and measurements of each step. A photograph alone can make a compact block look surprisingly substantial. The height should suit you and your horse, allowing you to reach the stirrup without an awkward stretch. If you are unsure, ask your riding instructor to help you judge a suitable size.
Look for treads deep enough to accommodate your riding footwear securely, with a top platform that gives you space to balance and turn. Narrow steps and steep rises may be awkward for someone with limited mobility. Where possible, try the block without a horse present first, on a suitable surface and with the seller’s permission.
Inspect the material and load-bearing structure
For moulded plastic blocks, inspect corners, step edges and the underside for splits, distortion or previous repairs. Sun-faded colour is not necessarily a problem, but brittle-looking surfaces, cracks and areas that flex unexpectedly deserve caution. Ask for a clear photograph of any manufacturer’s label, including the stated load limit, and check the manufacturer’s information where available.
With timber blocks, examine joints, fixings and the underside for rot, loose screws and splintered edges. Metal-framed versions need checks for corrosion, bent sections and damaged welds. Fresh paint can conceal deterioration, so ask what preparation or repairs were carried out. Avoid blocks with uncertain structural repairs: a tidy finish is no substitute for sound construction.
Test grip and stability before using it
Check that every foot or base edge makes proper contact with level ground. Apply pressure gradually to different parts of the platform before stepping up, and stop if the block rocks, twists or creaks unexpectedly. Do not test a visibly damaged block. Missing feet or improvised supports are reasons to investigate, not details to ignore.
Inspect grip strips, textured treads and drainage openings for wear or trapped mud. Peeling tape and algae can make steps slippery, particularly outdoors. Check for sharp projections or openings that could catch footwear or tack. Before introducing it to your horse, clean it according to the material or manufacturer’s instructions and let it dry thoroughly.
Agree collection details and describe it honestly
Before buying, confirm the block’s weight and whether it fits through your vehicle’s opening, not just inside the boot. Ask whether help is available for loading and secure it properly for transport. Include any replacement grip or necessary professional repairs in your decision; a damaged bargain may be less useful than a sound, simpler block.
If you are selling an unused mounting block, photograph all sides, the underside and any labels. Include accurate dimensions and disclose damage or repairs clearly rather than describing it as universally suitable. Selling on HobbyTrade is free, with no listing fees and no seller commission, and Buy now payments are covered by Buyer Protection.